AG WELDUST 10

The AG WELDUST 10 device comes in a mobile version together with an extraction arm. The extraction arm is 3 meters long. The extraction arm is located on a swivel joint, guaranteeing a long reach. Shown below in the picture. The device can also be delivered without a HEPA filter if required.

Parameters

AG WELDUST 10
  • Airflow: 700 – 1200 m3/hour
  • Power: 2,5 kW
  • Type of filters: PES, Celuloze, Teflon
  • Hepa filter: YES
  • Efficiency of filters: 99,50%
  • Noise level: 72 dB
  • Filtration surface: 10 – 20 m2
  • Dimensions: 1500x500x500 mm
  • Flange: 125 mm

THE PRINCIPLE OF WELDUST

The polluted air enters the device through one opening located on three sides of the device and continues through filter cartridges (2), where the first and main part of the air purification process takes place. Dirt that is trapped in the main filters adheres to the surface or falls straight down into a dirt container (3). The air continues through other parts of the device and passes through the HEPA filter (7), where the process of purifying the extracted air is completed. The device has the “CleanJet” automatic purification system (4). The CleanJet system consists of a compressed air tank and valves that clean the filters at a preset time. The fan (5) is equipped with a module for remote control and regulation.

THE PRINCIPLE OF WELDUST 10
BACK