EXTRACTION SYSTEMS – MOBILE

WELDUST MOBILE DEVICES

WELDUST mobile filtration devices are built and adapted to the most demanding conditions. The structure of the equipment is made of structural steel and the chassis of the equipment is reinforced for maximum mechanical load and durability. If your workplace is often in a different location, mobile extraction equipment is the ideal choice.

AG WELDUST 10 – M

Suitable for welding or grinding, the extraction system is built on a robust mobile structure. The device has a connector and is therefore very easy to quickly disconnect and connect.

PARAMETERS

  • Filter area: from 6m2 to 20m2 – selectable according to application and filter load according to application
  • Weight: 120 kg
  • Air flow: 600 – 1250 m3/hr
  • Power: 2,5 kW
  • Noise level: 75 dB
  • Inlet to the device: 125 mm
  • Height: 1750 mm
  • Width: 550 mm
  • Length: 525 mm
  • Remote control via phone – flow control
  • Suction arm length 3 or 4 metres

PRINCIPLE OF OPERATION

The polluted air enters the device through one opening located on three sides of the device and continues through the filter cartridges (2) where the first and main air cleaning takes place. Dirt that is trapped in the main filters sticks to the surface or falls straight down into the dirt container (3). The air then continues through other parts of the device and passes through the HEPA filter (7), where the exhaust air is completely purified. The device has an automatic cleaning system “CleanJet” (4). CleanJet consists of a compressed air tank and valves that clean the filters at each preset time. The fan (5) is equipped with a module for remote control and regulation.

The ECOMIST industrial extraction principle

AG WELDUST 20 – M

Suitable for welding or grinding, the extraction system is built on a robust mobile structure. The device has a connector and is therefore very easy to quickly disconnect and connect.

 

PARAMETERS

  • Filter area: from 12 m2 to 40 m2 – selectable according to application and filter load according to application
  • Weight: 160 kg
  • Air flow: 1 250- 2 000 m3/hr
  • Power: 2,5 kW
  • Noise level: 75 dB
  • Inlet to the device: 160 mm
  • Height: 1750 mm
  • Width: 950 mm
  • Length: 575 mm
  • Remote control via phone – flow control
  • Suction arm length 3 or 4 metres

PRINCIPLE OF OPERATION

The polluted air enters the device through one opening located on three sides of the device and continues through the filter cartridges (2) where the first and main air cleaning takes place. Dirt that is trapped in the main filters sticks to the surface or falls straight down into the dirt container (3). The air then continues through other parts of the device and passes through the HEPA filter (7), where the exhaust air is completely purified. The device has an automatic cleaning system “CleanJet” (4). CleanJet consists of a compressed air tank and valves that clean the filters at each preset time. The fan (5) is equipped with a module for remote control and regulation.

The ECOMIST industrial extraction principle