WELDING TABLES
WELDUST WELDING TABLES
Extraction and welding tables are devices for extracting dust and dirt. Suitable applications for this equipment are for example welding, grinding, polishing and other operations where it is necessary to place the part on a table and where any dry substance or smoke is present. The device is equipped with a self-cleaning CleanJet system that automatically cleans the filters according to a set interval. Inside the device there is a compressed air container with the possibility of adjusting the interval of the pressure shock discharge against the direction of the flow, thus cleaning the filter. The principle of the filter is very simple, through the inlet hole contaminated air enters the device, which passes through the filter and continues to the HEPA filter, where the air is completely cleaned
AG WELDING BOX 2
Stationary exhaust equipment suitable for low dusty operations. The device can be equipped with a HEPA filter or a spark arrestor.
PARAMETERS
- Filter area: from 6m2 to 20m2 – selectable according to application and filter load according to application
- Weight: 120 kg
- Air flow: 600 – 1250 m3/hr
- Power: 2,5 kW
- Noise level: 75 dB
- Inlet to the device: 125 mm
- Height: 1750 mm
- Width: 550 mm
- Length: 525 mm
- Remote control via phone – flow control
WELDING TABLE EQUIPMENT
The welding table is equipped with a control panel that is built into the side of the welding table. The basic equipment of the welding table can be seen in the picture and includes:
- Main switch
- Plug and Play connector
- 2 x metal socket for 230 V
- Manual fan on/off
- Manual switching on/off of the cleaning system
- Hepa filter, which is located at the outlet of the device
PRINCIPLE OF OPERATION OF WELDING TABLES
